SINGLE SMALL ORIFICE AIR RELEASE VALVE THREADED INSIDE

SIZE: 1/2” - 1”

 

 

Materials

 

Body

GGG 40 / 50

Cover

GGG 40 / 50

Ball

Stainless Steel 1.4301

Bonnet

GGG 40 / 50

Gaskets

EPDM / NBR

Bolts and nuts

Stainless Steel A2

Stem guide bush

Bronze

Corrosion protection

Epoxy powder coated RAL 5015

HYDAC Suction Strainer Elements are designed for installation into suction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir.

The suction strainer elements can be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. for best results, suction strainer elements should be sized for clean element pressure drops of no higher than 0.5 to 0.7 psi.
 
 
 

 

Tee

 

Size
(in.)		 Pressure
Rating
(psi)		 Dimensions in Inches Weight
Run Branch T T 1 H J
4 4 350 0.34 0.34 4.00 4.00 65
6 4 350 0.36 0.34 4.00 5.00 82
6 6 350 0.36 0.36 5.00 5.00 88
8 4 350 0.38 0.34 4.00 6.50 96
8 6 350 0.38 0.36 5.00 6.50 107
8 8 350 0.38 0.38 6.50 6.50 142
10 4 350 0.40 0.34 4.00 7.50 142
10 6 350 0.40 0.36 5.00 7.50 153
10 8 350 0.40 0.38 6.50 7.50 170
10 10 350 0.40 0.40 7.50 7.50 198
12 4 350 0.42 0.34 4.00 8.75 168
12 6 350 0.42 0.36 5.00 8.75 179
12 8 350 0.42 0.38 6.50 8.75 201
12 10 350 0.42 0.40 7.50 8.75 229
12 12 350 0.42 0.42 8.75 8.75 252
16 4 350 0.50 0.34 15.0 15.0 645
16 6 350 0.50 0.36 15.0 15.0 655
16 8 350 0.50 0.38 15.0 15.0 670
16 10 350 0.50 0.40 15.0 15.0 705
16 12 350 0.50 0.42 15.0 15.0 730
16 14 350 0.50 0.47 15.0 15.0 775
16 16 350 0.50 0.50 15.0 15.0 805
18 6 350 0.75 0.55 13.0 15.5 810
18 8 350 0.75 0.60 13.0 15.5 820
18 10 350 0.75 0.68 13.0 15.5 855
18 12 350 0.75 0.75 13.0 15.5 875
18 14 350 0.75 0.66 16.5 16.5 1015
18 16 350 0.75 0.70 16.5 16.5 1045
18 18 350 0.75 0.75 16.5 16.5 1125
20 6 350 0.80 0.55 14.0 17.0 905
20 8 350 0.80 0.60 14.0 17.0 920
20 10 350 0.80 0.68 14.0 17.0 950
20 12 350 0.80 0.75 14.0 17.0 975
20 14 350 0.80 0.66 14.0 17.0 1020
20 16 350 0.80 0.70 18.0 18.0 1170
20 18 350 0.80 0.75 18.0 18.0 1255
20 20 350 0.80 0.80 18.0 18.0 1270
24 6 350 0.61 0.36 13.0 17.0 920
24 8 350 0.61 0.38 13.0 17.0 930
24 10 350 0.61 0.40 13.0 17.0 950
24 12 350 0.61 0.42 13.0 17.0 965
24 14 350 0.61 0.47 13.0 17.0 990
24 16 350 0.61 0.50 13.0 17.0 1005
24 18 350 0.61 0.54 17.0 17.0 1035
24 20 350 0.61 0.57 17.0 17.0 1050
24 24 350 0.61 0.61 17.0 17.0 1130
30 20 250 0.66 0.57 16.5 21.0 1500
30 24 250 0.66 0.61 22.0 22.0 1840
30 30 250 0.66 0.66 22.0 22.0 2000
36 24 250 0.74 0.61 18.5 26.0 2070
36 30 250 0.74 0.66 26.0 26.0 2670
36 36 250 0.74 0.74 26.0 26.0 2740
42 24 250 0.82 0.61 22.0 27.5 3370
42 30 250 0.82 0.66 22.0 29.5 3340
42 36 250 0.82 0.74 30.0 30.0 3300
42 42 250 0.82 0.82 30.0 30.0 4830
48 24 250 0.90 0.61 23.0 32.0 3820
48 30 250 0.90 0.66 23.0 32.0 4180
48 36 250 0.90 0.74 33.5 32.3 5190
48 42 250 0.90 0.82 33.5 33.5 5600
48 48 250 0.90 0.90 33.5 33.5 6130

 

 

 

image

 

BUTTERFLY VALVE

Body : Cast Iron/ Cast Steel/ Ductile Iron/Staintless Steel Sizes : 2?? to 24??

 

As one of the most common valve types, gate valves use linear motion to start and stop the flow. These are typically not used for flow regulation. Instead, they used in the fully open or closed positions.

Tee

 

Size
(in.)		 Pressure
Rating
(psi)		 Dimensions in Inches Weight
Run Branch T T 1 H J
4 4 350 0.34 0.34 4.00 4.00 65
6 4 350 0.36 0.34 4.00 5.00 82
6 6 350 0.36 0.36 5.00 5.00 88
8 4 350 0.38 0.34 4.00 6.50 96
8 6 350 0.38 0.36 5.00 6.50 107
8 8 350 0.38 0.38 6.50 6.50 142
10 4 350 0.40 0.34 4.00 7.50 142
10 6 350 0.40 0.36 5.00 7.50 153
10 8 350 0.40 0.38 6.50 7.50 170
10 10 350 0.40 0.40 7.50 7.50 198
12 4 350 0.42 0.34 4.00 8.75 168
12 6 350 0.42 0.36 5.00 8.75 179
12 8 350 0.42 0.38 6.50 8.75 201
12 10 350 0.42 0.40 7.50 8.75 229
12 12 350 0.42 0.42 8.75 8.75 252
16 4 350 0.50 0.34 15.0 15.0 645
16 6 350 0.50 0.36 15.0 15.0 655
16 8 350 0.50 0.38 15.0 15.0 670
16 10 350 0.50 0.40 15.0 15.0 705
16 12 350 0.50 0.42 15.0 15.0 730
16 14 350 0.50 0.47 15.0 15.0 775
16 16 350 0.50 0.50 15.0 15.0 805
18 6 350 0.75 0.55 13.0 15.5 810
18 8 350 0.75 0.60 13.0 15.5 820
18 10 350 0.75 0.68 13.0 15.5 855
18 12 350 0.75 0.75 13.0 15.5 875
18 14 350 0.75 0.66 16.5 16.5 1015
18 16 350 0.75 0.70 16.5 16.5 1045
18 18 350 0.75 0.75 16.5 16.5 1125
20 6 350 0.80 0.55 14.0 17.0 905
20 8 350 0.80 0.60 14.0 17.0 920
20 10 350 0.80 0.68 14.0 17.0 950
20 12 350 0.80 0.75 14.0 17.0 975
20 14 350 0.80 0.66 14.0 17.0 1020
20 16 350 0.80 0.70 18.0 18.0 1170
20 18 350 0.80 0.75 18.0 18.0 1255
20 20 350 0.80 0.80 18.0 18.0 1270
24 6 350 0.61 0.36 13.0 17.0 920
24 8 350 0.61 0.38 13.0 17.0 930
24 10 350 0.61 0.40 13.0 17.0 950
24 12 350 0.61 0.42 13.0 17.0 965
24 14 350 0.61 0.47 13.0 17.0 990
24 16 350 0.61 0.50 13.0 17.0 1005
24 18 350 0.61 0.54 17.0 17.0 1035
24 20 350 0.61 0.57 17.0 17.0 1050
24 24 350 0.61 0.61 17.0 17.0 1130
30 20 250 0.66 0.57 16.5 21.0 1500
30 24 250 0.66 0.61 22.0 22.0 1840
30 30 250 0.66 0.66 22.0 22.0 2000
36 24 250 0.74 0.61 18.5 26.0 2070
36 30 250 0.74 0.66 26.0 26.0 2670
36 36 250 0.74 0.74 26.0 26.0 2740
42 24 250 0.82 0.61 22.0 27.5 3370
42 30 250 0.82 0.66 22.0 29.5 3340
42 36 250 0.82 0.74 30.0 30.0 3300
42 42 250 0.82 0.82 30.0 30.0 4830
48 24 250 0.90 0.61 23.0 32.0 3820
48 30 250 0.90 0.66 23.0 32.0 4180
48 36 250 0.90 0.74 33.5 32.3 5190
48 42 250 0.90 0.82 33.5 33.5 5600
48 48 250 0.90 0.90 33.5 33.5 6130

 

More Articles ...

  1. Double Socket Tee with Flanged Branch
  2. HEX FULL NUT (METRIC) – DIN 934 / ISO 4032
  3. HEX FULL NUT (IMPERIAL) – ANSI B18.2.2 / BS1768
  4. PLAIN WASHERS (METRIC) – BS4320 FORM A, B, C & D